|
| Products |
|
| Masthead
Antennas |
 |
|
|
|
|
|
Frequency bands |
: |
2.0-2.7GHz, 2.7-2.9GHz, 3.0 -
3.7GHz, 4.4-5.9GHz, 6.0-7.5GHz |
 |
|
Beam width |
: |
Omni |
|
Antenna gain |
: |
+3dBi |
|
Overall Length |
: |
100mm long |
|
Click here to download PDF
datasheet |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Frequency bands |
: |
2.0-2.7GHz, 2.7-2.9GHz, 3.0-3.7GHz, 4.4-5.0GHz |
 |
|
Beam width |
: |
90
degree |
| Antenna gain |
: |
+11dBi |
| Overall Length |
: |
140mm W x 140mm H x 80mm D |
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
| Frequency bands |
: |
2.0-2.7GHz, 2.7-2.9GHz,
3.0-3.7GHz, 4.4-5.9GHz, 6.0-7.5GHz |
 |
|
Beam width |
: |
80
degree |
| Antenna gain |
: |
+9dBi |
| Overall Length |
: |
100mm W x 100mm H x 60mm D |
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
| Frequency bands |
: |
2.0-2.7GHz, 4.4-5.0GHz |
 |
|
Beam width |
: |
Depends on helix turns |
| Antenna gain |
: |
1.5 turn = +7.5dBi up to 18 turn
= +18.3dBi |
| Overall Length |
: |
100 - 610mm |
|
Click here to download PDF
datasheet |
|
|
|
|
| Boxx TV |
 |
|
|
|
|
| Frequency bands |
: |
5GHz licence exempt spectrum |
 |
|
|
|
Automatic channel select
(seeks and locks onto cleanest
frequency |
|
Latency |
: |
Zero frame latency (<1
millisecond) |
|
RF Power Output |
: |
Up to 100mw |
|
Bandwidth |
: |
20Mhz |
|
Secure transmission |
: |
256 bit AES Encryption |
|
Coverage |
: |
Daisy-chain multiple receivers
with seamless handover to
increase coverage |
| |
|
|
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
| Frequency bands |
: |
5GHz licence exempt spectrum |
 |
|
|
|
Automatic channel select
(seeks and locks onto cleanest
frequency |
|
Latency |
: |
465ms |
|
RF Power Output |
: |
50mw |
|
Bandwidth |
: |
Automatic dynamic data rate |
|
Secure transmission |
: |
128 bit AES Encryption |
|
Coverage |
: |
Up to 800m LOS |
| |
- Unique wireless broadcast
technology provides a
live-to-air microwave link from
any camera without ghosting. -
Break-up or interference at a
fraction of the cost of
traditional digital microwave
systems.
- Unique bi-directional
transmission system. Each packet
of data is acknowledged by the
receiver.
- Lost data can be requested and
resent, creating an extremely
robust link. |
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
| Frequency bands |
: |
5GHz licence exempt spectrum |
 |
|
Latency |
: |
60ms |
|
RF Power Output |
: |
Up to 600mw adjustable |
|
Bandwidth |
: |
5 - 40 MHz |
|
Secure transmission |
: |
256 bit AES Encryption |
|
Coverage |
: |
Up to 1km (camera back) 10km
(Point to Point) |
|
|
- Designed for ENG & HD live
productions.
- Unlimited coverage area using
unique network capability
- Wide bandwidth mode
allows system to "navigate"
around interference creating
robust & stable link
- Configuration & monitoring via
web page |
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
| Frequency bands |
: |
60GHz licence exempt spectrum |
 |
|
Latency |
: |
<2ns (30% quicker than fibre) |
|
RF Power Output |
: |
10mw |
|
Aggregate throughput |
: |
2.97 Gbps, HD SDI x 2 (1.48
Gbps) |
|
Coverage |
: |
20-500metres (clear to moderate
rain) |
|
|
- Transmits up to two
independent uncompressed HD
streams
- Can be configured for combined
bandwidth or separate feeds or
single feed with redundancy
- Built in RSSI bar graph for
alignment confirmation. |
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
| SkyDreams
Technologies, Inc. |
 |
|
|
|
|
| Frequency bands |
: |
900MHz/ 2.4 GHz Spread spectrum
16 channel hopping |
 |
|
Input power |
: |
10-40 vdc 1amp |
|
Output power |
: |
100mw - 1w programmable |
|
Range |
: |
Up to 2 miles |
|
I/O connectors |
: |
8 pin /USB |
|
|
- Any camera that can be
controlled by a RMB 150/750, RCP
750/920 can be controlled by the
AirPaint.
- AirPaint gives you full CCU
control as well as start/stop
and replay functions for
camcorders.
- Working on Panasonic, Ikegami,
and other protocols new firmware
updates available soon |
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
|
|
|
| Frequency |
: |
48MHz to 2.4 GHz |
 |
|
Input power |
: |
12Vdc |
|
Distance |
: |
10 miles |
|
RF input |
: |
40dbm max |
|
RF connector |
: |
BNC |
|
Fibre connector. |
: |
ST |
|
|
- Uses Single mode fibre
- Works with any RF signal from
48MHz to 2.4GHz
- FiberAnt also has a built in
12 Vdc BiasT that allows you to
power an active antenna or down
converter |
|
|
|
Click here to download PDF
datasheet |
|
|
|
|
*
Further information |
|
| *
If you require more information please
complete the enquiry form
and someone will contact you to discuss your
requirements |
|
